MAN / VAG EDC7C32 ECU Clone & Programming
This is a 1-to-1 cloning service for the MAN / VAG EDC7C32 diesel engine control unit. When one of these units fails, a bare replacement won’t run until its data is matched to your vehicle — normally a dealer coding and immobiliser-synchronisation job. We read the data from your original EDC7C32 and write it onto a matching replacement, so the unit you get back is a genuine plug-and-play match: no dealer flash, no immobiliser pairing, and no key re-coding after install.
Vehicles this unit may be fitted to
The EDC7C32 is a Bosch EDC7 heavy-duty common-rail diesel engine control unit, used on commercial trucks and machinery. It is fitted to the TGX, TGS, TGM and TGL trucks and buses, and VW, Audi, SEAT and Škoda TDI diesels.
Exact fitment depends on the engine, transmission, market and model year, so please send us your part and software numbers before ordering and we’ll confirm your unit is an exact match.
Common faults we see
Common diesel-ECU failures include no-start, injector-driver faults, EGR and glow-plug driver failures, limp mode and water-ingress damage. A 1-to-1 clone keeps your VIN and immobiliser data intact on a working unit.
What we copy across
Working from your original ECU, we transfer the complete flash and calibration, your VIN, and your immobiliser (immo) data onto the matching replacement EDC7C32. Every value lines up with what your vehicle expects, so the cloned unit installs ready to run.
How ordering works
- Order this service and complete checkout.
- Ship us both units — your original EDC7C32 and the matching replacement — or drop them off at our Calgary shop.
- We clone your data onto the replacement and bench-test it, usually within 24 hours of arrival.
- We return the finished ECU ready to install.
Turnaround, shipping & warranty
Most orders are cloned, tested and back out the door within 24 hours. We’re based in Calgary and welcome local drop-off from Calgary and the surrounding communities, with Canada-wide and international shipping for everyone else. All cloning work carries a 12-month warranty and a 100% money-back guarantee.
Before you order
We need to read your original unit to copy its data, and your replacement must be the correct matching EDC7C32 hardware. If your original is completely dead or you’re unsure the two units match, message us with your part and software numbers first.
Reviews
There are no reviews yet.